Step 1: Seems like LSI was taken over by another company. Finding it was a bit harder, but here is the latest version of the software. (as at 14 October 2015)
Step 2: Copy the file to an appropriate location on your Linux machine. In this case, we will use /var/tmp/
Step 3: Execute the following commands (in the exact order)
# Log in as 'root' user or use 'sudo' to execute the following commands [root@rhel_host ~] cd /var/tmp [root@rhel_host tmp] unzip 8-07-14_MegaCLI.zip [root@rhel_host tmp] cd Linux [root@rhel_host Linux] rpm -Uvh MegaCli-8.07.14-1.noarch.rpm ....wait for installer to finish.... [root@rhel_host Linux] alias MegaCli="/opt/MegaRAID/MegaCli/MegaCli64"
Step 4: Make the alias command, above, permanent
# Navigate to your home directory [root@rhel_host MegaCLI_Linux] cd ~ # Open your .bashrc file and add the following line [root@rhel_host ~] vim .bashrc alias MegaCli='/opt/MegaRAID/MegaCli/MegaCli64'
Step 5: Test the install. As an example, let’s list all the logical volumes in the machine (output may differ based on configuration.
[root@rhel_host MegaCLI_Linux] MegaCli -LDInfo -Lall -aALL Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name :Virtual Disk 0 RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3 Size : 1.088 TB Sector Size : 512 Parity Size : 278.875 GB State : Optimal Strip Size : 64 KB Number Of Drives : 5 Span Depth : 1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Enabled Encryption Type : None Bad Blocks Exist: No Is VD Cached: Yes Cache Cade Type : Read Only Virtual Drive: 1 (Target Id: 1) Name :JBOD RAID Level : Primary-0, Secondary-0, RAID Level Qualifier-0 Size : 278.875 GB Sector Size : 512 Parity Size : 0 State : Optimal Strip Size : 64 KB Number Of Drives : 1 Span Depth : 1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disk's Default Encryption Type : None Bad Blocks Exist: No Is VD Cached: Yes Cache Cade Type : Read Only Exit Code: 0x00
You must be logged in to post a comment.